Daily Papers

We apply preference learning to the task of language model-guided design of novel structural alloys. In contrast to prior work that focuses on generating stable inorganic crystals, our approach targets the synthesizeability of a specific structural class: BCC/B2 superalloys, an underexplored family of materials with potential applications in extreme environments. Using three open-weight models (LLaMA-3.1, Gemma-2, and OLMo-2), we demonstrate that language models can be optimized for multiple design objectives using a single, unified reward signal through Direct Preference Optimization (DPO). Unlike prior approaches that rely on heuristic or human-in-the-loop feedback (costly), our reward signal is derived from thermodynamic phase calculations, offering a scientifically grounded criterion for model tuning. To our knowledge, this is the first demonstration of preference-tuning a language model using physics-grounded feedback for structural alloy design. The resulting framework is general and extensible, providing a path forward for intelligent design-space exploration across a range of physical science domains.

Proposed as blanket structural materials for fusion power reactors, reduced activation ferritic/martensitic (RAFM) steel undergoes volume expanding and contracting in a cyclic mode under service environment. Particularly, being subjected to significant fluxes of fusion neutrons RAFM steel suffers considerable local volume variations in the radiation damage involved regions. It is necessary to study the structure properties of the alloying elements in contraction and expansion states. In this paper we studied local substitution structures of thirteen alloying elements Al, Co, Cr, Cu, Mn, Mo, Nb, Ni, Si, Ta, Ti, V, and W in bcc Fe and calculated their substitutional energies in the volume variation range from -1.0% to 1.0%. From the structure relaxation results of the first five neighbor shells around the substitutional atom we find the relaxation in each neighbor shell keeps approximately uniform within the volume variation from -1.0% to 1.0% except those of Mn and the relaxation of the fifth neighbor shell is stronger than that of the third and forth, indicating that the lattice distortion due to the substitution atom is easier to spread in <111> direction than in other direction. The relaxation pattern and intensity are related to the size and electron structure of the substitutional atom. For some alloying elements, such as Mo, Nb, Ni, Ta, Ti and W, the substitutional energy decreases noticeably when the volume increases. Further analysis show that the substitutional energy comprises the energy variation originated from local structure relaxation and the chemical potential difference of the substitutional atom between its elemental crystalline state and the solid solution phase in bcc Fe. We think the approximately uniform relaxation of each neighbor shell around a substitutional atom give rise to a linear decrease in the substitutional energy with the increasing volume.

The discovery of high-temperature superconducting materials holds great significance for human industry and daily life. In recent years, research on predicting superconducting transition temperatures using artificial intelligence~(AI) has gained popularity, with most of these tools claiming to achieve remarkable accuracy. However, the lack of widely accepted benchmark datasets in this field has severely hindered fair comparisons between different AI algorithms and impeded further advancement of these methods. In this work, we present the HTSC-2025, an ambient-pressure high-temperature superconducting benchmark dataset. This comprehensive compilation encompasses theoretically predicted superconducting materials discovered by theoretical physicists from 2023 to 2025 based on BCS superconductivity theory, including the renowned X_2YH_6 system, perovskite MXH_3 system, M_3XH_8 system, cage-like BCN-doped metal atomic systems derived from LaH_{10} structural evolution, and two-dimensional honeycomb-structured systems evolving from MgB_2. The HTSC-2025 benchmark has been open-sourced at https://github.com/xqh19970407/HTSC-2025 and will be continuously updated. This benchmark holds significant importance for accelerating the discovery of superconducting materials using AI-based methods.

This study explores cardiovascular stents fabricated using laser powder bed fusion (LPBF); an emerging method to offer patient-specific customisable parts. Here, the shape memory alloy NiTi, in a near equiatomic composition, was investigated to deconvolve the material response from macroscopic component effects. Specifically, stress-geometry interactions were revealed, in-situ, for a minaturised cardiovascular stent subjected to an externally applied cylindrical stress whilst acquiring synchrotron X-ray imaging and diffraction data. The approach enabled the collection of spatially resolved micromechanical deformation data; the formation of stress-induced martensite and R-phase was evident, occurring in locations near junctions between stent ligaments where stress concentrations exist. In the as-fabricated condition, hardness maps were obtained through nanoindentation, demonstrating that the localised deformation and deformation patterning is further controlled by porosity and microstructural heterogeneity. Electron backscatter diffraction (EBSD) supported these observations, showing a finer grain structure near stent junctions with higher associated lattice curvature. These features, combined with stress concentrations when loaded will initiate localised phase transformations. If the stent was subjected to repeated loading, representing in-vivo conditions, these regions would be susceptible to cyclic damage through transformation memory loss, leading to premature component failure. This study highlights the challenges that must be addressed for the post-processing treatment of LABF-processed stents for healthcare-related applications.

The thermal properties are one of the key parameters to control phase purity and microstructure of polycrystalline materials. The melting point of the iron-based BaFe2As2 superconductor (Ba122), which foresees high-field applications, remains controversial. In this work, thermogravimetry-differential scanning calorimetry measurements (TG-DSC) of undoped and Co-doped Ba122 were carried out. Mixtures of elemental metals and pre-reacted Ba122 powders were prepared to investigate the thermal responses during in situ and ex situ synthesis routes, respectively. In addition, the phases and microstructures of the quenched samples were evaluated to elucidate the observed exothermic/endothermic peaks. Our results suggest that the melting point of Ba122 is ~1300°C.

The presence of thermal gradients in alloys often leads to non-uniformity in concentration profiles, which can induce the thermomigration of microstructural features such as precipitates. To investigate such microstructural changes, we present a phase-field model that incorporates coupling between concentration and thermal gradients. First, we simulated the evolution of non-uniform concentration profiles in the single-phase regions of Fe-C and Fe-N alloy systems due to imposed thermal gradients. To validate our model with the classical experiments performed by Darken and Oriani, we studied the evolution of spatially varying concentration profiles where thermal gradients encompass single-phase and two-phase regions. We developed a parameterized thermodynamic description of the two-phase region of a binary alloy to systematically study the effect of interactions between chemically-driven and thermal gradient-driven diffusion of solute on the evolution of precipitates. Our simulations show how thermal gradient, precipitate size, and interparticle distance influence the migration and associated morphological changes of precipitates. The composition profiles and migration rates obtained from single-particle simulations show an exact match with our analytical model. We use twoparticle simulations to show conditions under which thermomigration induces the growth of the smaller particle and shrinkage of the larger one in contrast to the isothermal Ostwald ripening behavior. Our multiparticle simulations show similar behavior during coarsening. Moreover, in the presence of a thermal gradient, there is a shift in the center of mass of the precipitates towards the high-temperature region. Thus, our study offers new insights into the phenomena of microstructure evolution in the presence of thermal gradient.

Exploratory synthesis efforts for iron-based superconductors (FeSC) have been driven by hopes of improving superconducting critical temperatures (TCs), providing high-quality samples for in-depth studies of intrinsic properties, and exploring potential superconductivity in similar families of materials. This manuscript summarizes the synthesis routes that are used for producing FeSC and their undoped parents, in single crystal and polycrystalline forms. A few of the materials challenges are summarized.

Searching for new superconductors, especially unconventional superconductors, has been studied extensively for decades but remains one of the major outstanding challenges in condensed matter physics. Medium/high-entropy alloys (MEAs-HEAs) are new fertile soils of unconventional superconductors and generate widespread interest and questions on the existence of superconductivity in highly disordered materials. Here, we report on the effect of Ni-doped on the crystal structure and superconductivity properties of strongly coupled TiHfNbTa MEA. XRD results indicate that the maximum solid solution of (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix is about 7.7%. Resistivity, magnetic susceptibility, and specific heat measurements demonstrated that (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix HEAs are all bulk type-II superconductors and follow the trend of the increase of Tc with the increase of Ni-doped contents. The specific heat jump of all (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix are much larger than the BCS value of 1.43, suggesting all these HEAs are strongly coupled superconductors. Additionally, large Kadawaki-Woods ratio values suggest that there is a strong electron correlation effect in this system. The (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix HEA system is a new ideal material platform for the study of strong correlation behavior and strongly coupled superconductivity, which provides an insight into the physics of high-temperature superconductors or other unconventional superconductors.

We present a novel method for measuring |V_{cb}| at the LHC using an advanced boosted-jet tagger to identify "bc signatures". By associating boosted W rightarrow bc signals with bc-matched jets from top-quark decays, we enable an in-situ calibration of the tagger. This approach significantly suppresses backgrounds while reducing uncertainties in flavor tagging efficiencies -- key to improving measurement precision. Our study is enabled by the development of realistic, AI-based large- and small-radius taggers, Sophon and the newly introduced SophonAK4, validated to match ATLAS and CMS's state-of-the-art taggers. The method complements the conventional small radius jet approach and enables a ~30% improvement in |V_{cb}| precision under HL-LHC projections. As a byproduct, it enhances H^{pm} rightarrow bc search sensitivity by a factor of 2--5 over the recent ATLAS result based on Run 2 data. Our work offers a new perspective for the precision |V_{cb}| measurement and highlights the potential of using advanced tagging models to probe unexplored boosted regimes at the LHC.

The application of superconducting materials is becoming more and more widespread. Traditionally, the discovery of new superconducting materials relies on the experience of experts and a large number of "trial and error" experiments, which not only increases the cost of experiments but also prolongs the period of discovering new superconducting materials. In recent years, machine learning has been increasingly applied to materials science. Based on this, this manuscript proposes the use of XGBoost model to identify superconductors; the first application of deep forest model to predict the critical temperature of superconductors; the first application of deep forest to predict the band gap of materials; and application of a new sub-network model to predict the Fermi energy level of materials. Compared with our known similar literature, all the above algorithms reach state-of-the-art. Finally, this manuscript uses the above models to search the COD public dataset and identify 50 candidate superconducting materials with possible critical temperature greater than 90 K.

We report on studies of the superconducting and normal state properties of the noncentrosymmetric superconductor BeAu under hydrostatic pressure conditions. The room-temperature equation of state (EOS) reveals the values of the bulk modulus (B_0) and its first derivative (B^prime_0) at ambient pressure to be B_0 simeq 132~GPa and B^prime_0 simeq 30, respectively. Up to the highest pressures studied (p simeq 2.2~GPa), BeAu remains a multi-gap type-I superconductor. The analysis of B_{rm c}(T, p) data within the self-consistent two-gap approach suggests the presence of two superconducting energy gaps, with the gap-to-T_{rm c} ratios Δ_1/k_{rm B}T_{rm c} sim 2.3 and Δ_2/k_{rm B}T_{rm c} sim 1.1 for the larger and smaller gaps, respectively [Δ= Δ(0) is the zero-temperature value of the gap and k_{rm B} is the Boltzmann constant]. With increasing pressure, Δ_1/k_{rm B}T_{rm c} increases while Δ_2/k_{rm B}T_{rm c} decreases, suggesting that pressure enhances (weakens) the coupling strength between the superconducting carriers within the bands where the larger (smaller) superconducting energy gap has opened. The superconducting transition temperature T_{rm c}, black{the zero-temperature values of the superconducting gaps Δ_1 and Δ_2} and the zero-temperature value of the thermodynamic critical field B_{rm c}(0) decrease with increasing pressure, with the rates of {rm d}T_{rm c}/{rm d}p simeq -0.195~K/GPa, black{{rm d}Δ_1/{rm d}p simeq -0.034~meV/GPa, {rm d}Δ_2/{rm d}p simeq -0.029~meV/GPa,} and {rm d}B_{rm c}(0)/{rm d}p = -2.65(1)~mT/GPa, respectively. The measured B_{rm c}(0) values plotted as a function of T_{rm c} follow an empirical scaling relation established for conventional type-I superconductors.

Alloy discovery is central to advancing modern industry but remains hindered by the vastness of compositional design space and the costly validation. Here, we present AutoMAT, a hierarchical and autonomous framework grounded in and validated by experiments, which integrates large language models, automated CALPHAD-based simulations, and AI-driven search to accelerate alloy design. Spanning the entire pipeline from ideation to validation, AutoMAT achieves high efficiency, accuracy, and interpretability without the need for manually curated large datasets. In a case study targeting a lightweight, high-strength alloy, AutoMAT identifies a titanium alloy with 8.1% lower density and comparable yield strength relative to the state-of-the-art reference, achieving the highest specific strength among all comparisons. In a second case targeting high-yield-strength high-entropy alloys, AutoMAT achieves a 28.2% improvement in yield strength over the base alloy. In both cases, AutoMAT reduces the discovery timeline from years to weeks, illustrating its potential as a scalable and versatile platform for next-generation alloy design.

For decades, researchers have developed task-specific models to address scientific challenges across diverse disciplines. Recently, large language models (LLMs) have shown enormous capabilities in handling general tasks; however, these models encounter difficulties in addressing real-world scientific problems, particularly in domains involving large-scale numerical data analysis, such as experimental high energy physics. This limitation is primarily due to BPE tokenization's inefficacy with numerical data. In this paper, we propose a task-agnostic architecture, BBT-Neutron, which employs a binary tokenization method to facilitate pretraining on a mixture of textual and large-scale numerical experimental data. We demonstrate the application of BBT-Neutron to Jet Origin Identification (JoI), a critical categorization challenge in high-energy physics that distinguishes jets originating from various quarks or gluons. Our results indicate that BBT-Neutron achieves comparable performance to state-of-the-art task-specific JoI models. Furthermore, we examine the scaling behavior of BBT-Neutron's performance with increasing data volume, suggesting the potential for BBT-Neutron to serve as a foundational model for particle physics data analysis, with possible extensions to a broad spectrum of scientific computing applications for Big Science experiments, industrial manufacturing and spacial computing. The project code is available at https://github.com/supersymmetry-technologies/bbt-neutron.

Material and product life cycles are based on complex value chains of technology-specific elements. Resource strategy aspects of essential and strategic raw materials have a direct impact on applications of new functionalized materials or the development of novel products. Thus, an urgent challenge of modern materials science is to obtain information about the supply risk and environmental aspects of resource utilization, especially at an early stage of basic research. Combining the fields of materials science, industrial engineering and resource strategy enables a multidisciplinary research approach to identify specific risks within the value chain, aggregated as the so-called resource criticality. Here, we demonstrate a step-by-step criticality assessment in the sector of basic materials research for multifunctional hexagonal manganite YMnO3, which can be a candidate for future electronic systems. Raw material restrictions can be quantitatively identified, even at such an early stage of materials research, from eleven long-term indicators including our new developed Sector Competition Index. This approach for resource strategy for modern material science integrates two objective targets: reduced supply risk and enhanced environmental sustainability of new functionalized materials, showing drawbacks but also benefits towards a sustainable materials research and development.

In geometrically frustrated magnetic systems, weak interactions or slight changes to the structure can tip the delicate balance of exchange interactions, sending the system into a different ground state. Brochantite, Cu_4SO_4(OH)_6, has a copper sublattice composed of distorted triangles, making it a likely host for frustrated magnetism, but exhibits stacking disorder. The lack of synthetic single crystals has limited research on the magnetism in brochantite to powders and natural mineral crystals. We grew crystals which we find to be a new polytype with a tendency toward ABAC stacking and some anion disorder, alongside the expected stacking disorder. Comparison to previous results on natural mineral specimens suggests that cation disorder is more deleterious to the magnetism than anion and stacking disorder. Our specific heat data suggest a double transition on cooling into the magnetically ordered state.

Statistics of grain sizes and orientations in metals correlate to the material's mechanical properties. Reproducing representative volume elements for further analysis of deformation and failure in metals, like 316L stainless steel, is particularly important due to their wide use in manufacturing goods today. Two approaches, initially created for video games, were considered for the procedural generation of representative grain microstructures. The first is the Wave Function Collapse (WFC) algorithm, and the second is constraint propagation and probabilistic inference through Markov Junior, a free and open-source software. This study aimed to investigate these two algorithms' effectiveness in using reference electron backscatter diffraction (EBSD) maps and recreating a statistically similar one that could be used in further research. It utilized two stainless steel EBSD maps as references to test both algorithms. First, the WFC algorithm was too constricting and, thus, incapable of producing images that resembled EBSDs. The second, MarkovJunior, was much more effective in creating a Voronoi tessellation that could be used to create an EBSD map in Python. When comparing the results between the reference and the generated EBSD, we discovered that the orientation and volume fractions were extremely similar. With the study, it was concluded that MarkovJunior is an effective machine learning tool that can reproduce representative grain microstructures.

Dislocation model of the supersolid state of ^4He was proposed in 1987 by one of the authors of the review. The model obtained strong support by numerous experimental and theoretical investigations from 2007 to date. In these investigations the validity of the idea put forward in 1987 was confirmed, and new conceptions of superclimb of dislocations and of the giant isochoric compressibility or the syringe effect were proposed. In this paper we review main achievements of theoretical and experimental studies of dislocation-induced supersolid and present current understanding of this phenomenon.

We develop a multi-step workflow for the discovery of conventional superconductors, starting with a Bardeen Cooper Schrieffer inspired pre-screening of 1736 materials with high Debye temperature and electronic density of states. Next, we perform electron-phonon coupling calculations for 1058 of them to establish a large and systematic database of BCS superconducting properties. Using the McMillan-Allen-Dynes formula, we identify 105 dynamically stable materials with transition temperatures, Tc>5 K. Additionally, we analyze trends in our dataset and individual materials including MoN, VC, VTe, KB6, Ru3NbC, V3Pt, ScN, LaN2, RuO2, and TaC. We demonstrate that deep-learning(DL) models can predict superconductor properties faster than direct first principles computations. Notably, we find that by predicting the Eliashberg function as an intermediate quantity, we can improve model performance versus a direct DL prediction of Tc. We apply the trained models on the crystallographic open database and pre-screen candidates for further DFT calculations.

We have systematically investigated the grain boundary (GB) angle dependence of transport properties for NdFeAs(O,F) fabricated on [001]-tilt symmetric MgO bicrystal substrates. In our previous study, NdFeAs(O,F) bicrystal films showed a weak-link behaviour even at a GB angle of 6°. However, this was caused by an extrinsic effect originating from the damage to both NdFeAs(O,F) and MgO substrate by excess F-diffusion along the grain boundary. To investigate the intrinsic nature of grain boundaries, we minimized the damage to NdFeAs(O,F) and MgO by reducing the deposition temperature of NdOF over-layer needed for F-doping. The resultant NdFeAs(O,F) bicrystal films have a critical angle of 8.5°, above which Jc starts to decrease exponentially. This critical angle is almost the same as those of other Fe-based superconductors.

We report a quasi-one-dimensional S = 1 spin chain compound BaNiTe2O7. This magnetic system has been investigated by magnetic susceptibility, specific heat, and neutron powder diffraction. These results indicate that BaNiTe2O7 develops a short-range magnetic correlation around T ~ 22 K. With further cooling, an antiferromagnetic phase transition is observed at TN ~ 5.4 K. Neutron powder diffraction revealed antiferromagnetic noncollinear order with a commensurate propagation vector k = (1/2, 1, 0). The refined magnetic moment size of Ni2+ at 1.5 K is 1.84{\mu}B, and its noncollinear spin texture is confirmed by first-principles calculations. Inelastic neutron-scattering results and density functional theory calculations confirmed the quasi-one-dimensional nature of the spin systems.

Both continuous and discontinuous precipitation is known to occur in CuAg alloys. The precipitation of Ag-rich phase has been experimentally investigated by atom probe tomography and transmission electron microscopy after ageing treatment of Cu-5%wtAg at 440^circC during 30'. Both continuously and discontinuously formed precipitates have been observed. The precipitates located inside the grains exhibit two different faceted shapes: tetrahedral and platelet-shaped precipitates. Dislocations accommodating the high misfit at the interface between the two phases have also been evidenced. Based on these experimental observations, we examine the thermodynamic effect of these dislocations on the nucleation barrier and show that the peculiar shapes are due to the interfacial anisotropy. The appropriate number of misfit dislocations relaxes the elastic stress and lead to energetically favorable precipitates. However, due to the large misfit between the parent and precipitate phases, discontinuous precipitation that is often reported for CuAg alloys can be a lower energetic path to transform the supersaturated solid solution. We suggest that the presence of vacancy clusters may assist intragranular nucleation and decrease